Mixing

First step is to ensure you have everything read, black and glasses set up to laminate. Workout if you’re going to measure by weight or volume as rations will be slightly different: 

By weight 100 parts resin to 44 parts of hardener. 

By volume 2 parts resin to 1 part hardener. 

If the resin and hardeners are dispensed into separate measuring contains and then poured into a common mixing container, be sure to extricate int all from the container surfaces to get the remaining material into the mixing container to assure proper proportions. 

Once the products are dispensed into the mixing container, stir thoroughly, ensuring to scrape the sides and bottom of the container. Clean sticks of wood or tongue depressors can be used for stirring. 

Remember these key points for successful use of Surfset® epoxy 

Keep things clean, keep products away from your skin, eyes and provide adequate ventilation. Ensure you mix the products thoroughly at the correct ratio.  

Consult the Surfset® SDS before use. 

Prior to doing any mixing ensure that all the tools you need are ready for use, including cleaners and solvents. 

Planning what you will be doing and thinking of the tools that will be needed can save you a lot of headaches, particularly when attempting unfamiliar procedures.