Our Compset 5-2-1 system is a high performance, low viscosity hand laminating system. Developed for the production of articles where thin film cure is of particular importance.
Low viscosity facilitates wet-out of difficult laminates. Containing no solvents ensures low dour during application and cures to a clear finish.
Compset 5-2-1 Resin
The Compset 5-2-1 epoxy resin has been developed to provide good mechanical properties at cure temperatures between 15°C – 30°C. Progressive post curing at elevated temperatures will shorten processing times and increase toughness of the laminate.
Compset 5-2-1 epoxy utilises three hardener grades that cover temperature conditions and thickness of the laminate.
- Compset 5-2-1 Fast Hardener (15°C – 25°C)
- Compset 5-2-1 Standard Hardener (20°C-30°C)
- Compset 5-2-1 Slow Hardener (25°C-35°C)
High humidity or sudden drops in temperature may result in condensation on the surface of the laminate causing loss of inter-laminate adhesion. Adhesion may be obtained by sanding the surface of the laminate.
